Fire Alarm Bell in Bangladesh
Electronic sounders and bells that make loud, high-pitched sounds to notify people of fire emergencies. We supply conventional and addressable fire alarm bells, sounders, and sounder-flasher combinations throughout Bangladesh.
What is a Fire Alarm Bell?
A fire alarm bell is an electronic sounder or a bell that serves as a critical component in fire safety systems. The alarm makes a loud, high-pitched sound to notify people that there is a fire in the building. Sounders can be programmed to sound in different tones, while bells make a continuous ringing sound.
Fire alarm bells go by a variety of names—alarm bell, fire bell, sprinkler bell, or gong bell—but they all serve the same essential purpose: alerting building occupants to evacuate immediately in case of fire.
Active Fire Protection Component
Fire alarm bells are active elements of a fire alarm system. This component uses audible stimuli to alert the occupants in the event of an emergency or fire situation. They are the most commonly used alarm for fire evacuation systems.
Types of Fire Alarm Bells We Supply
Fire Alarm Bells
Traditional bells with continuous ringing sound
Fire Alarm Sounders
Electronic sounders with programmable tones
Sounder with Flasher
Combined audio and visual alert systems
Addressable Systems
Smart systems with individual device monitoring
All types available in both Conventional and Addressable configurations
How Fire Alarm Bells Work
Manual Activation
In the case of a manual call point, the bell is directly attached to it and will start ringing upon the press of the button.
Vibrating Bell: Rings continuously until power is cut off
Automatic Activation
Automatic call points come with sensors within them and they can trigger the alarms in case of an emergency or fire incident.
Single-Stroke Bell: Rings once when powered, requires power cycle to ring again
All kinds of issues can lead to the activation of a fire alarm bell—rising smoke, ambient heat, and even water flow through the fire alarm system—but all bells ring to encourage safe and early evacuation by a building's occupants.
Professional Installation Process
Mount your fire alarm bell in six steps
Mount at the Right Height
Choose a mounting height for your bell based on your ceiling height and local regulations
Remove the Gong
Remove the red bowl, or gong, surrounding the inner parts for installation
Wire the Fire Alarm Bell
Connect the wires in the bell to the wires in the wall. Instructions vary with the type of current used
Mount to Outlet Box
Fasten the included bolts in the holes that align the bell's housing unit with the back box
Reattach the Gong
Align the two holes on the gong with the positioning pins on the bell's housing unit and re-tighten
Test the Bell
Test the bells to ensure that they are correctly wired and working fine
Why Choose a Fire Alarm Bell System For Your Site?
Mandatory Safety Requirement
Due to recent requirements set by governments as well as the local authorities, it is mandatory that a site must be equipped with an adequate fire alarm system and all other integrated safety and security measures.
Having these systems installed and properly working will ensure that your site remains in foolproof protection all the time and you have plenty of time to react and contain any crisis situation.
Emergency Response Procedures
What to Do When You Hear the Fire Alarm Bell
- Evacuate the building immediately
- Follow the directions of the Fire Evacuation Plan
- Notify other occupants to leave the building
- Do not use any elevators
- Proceed to designated Assembly Points
When a Continuous Bell is Sounded
- Evacuate to the outside and find a safe place
- NEVER go back for personal belongings
- Move away from the building front for firefighter access
- Avoid areas underneath upper floor incidents
- Wait for all-clear signal before re-entering
Remember: Assembly Points where evacuees can wait safely for further instructions shall be designated with a signboard in Blue Color
Common Causes of False Fire Alarms
Important: A common cause of false fire alarm is the unintended triggering of a manual call point, mostly put in insecure areas where it is easy to knock or strike delicate 'break glass' units.
Complete Fire Alarm Bell Services
Supply
Wide range of fire alarm bells, sounders, and sounder-flasher combinations from leading manufacturers
Installation
Professional installation by certified technicians ensuring proper placement and optimal coverage
Maintenance
Regular testing and maintenance to ensure your fire alarm bells work when you need them most
Your Complete Fire Protection Partner
The best thing about partnering with ICEL Bangladesh is that we are your complete solution for all fire protection services. Our experienced fire safety engineers and technicians specialize in every aspect of fire protection.
Our Services Include:
Ensure Clear Fire Alerts Throughout Your Facility
Are you located in Dhaka, Chittagong, Sylhet, or anywhere in Bangladesh? Call us today to speak with one of our experienced fire safety engineers and discover why businesses and government organizations consistently recommend ICEL Bangladesh.