Manual Call Points in Bangladesh
Essential fire alarm activation devices for manual emergency alerts. Designed for raising alarms when fire or emergency conditions exist. Available in various types including pull stations, break glass units, and explosion-proof models.
What is a Manual Call Point?
Manual call points are designed for the purpose of raising an alarm manually once verification of a fire or emergency condition exists. By operating the push button or break glass, the alarm signal can be raised. They are usually connected to a central fire alarm panel which is in turn connected to an alarm system in the building.
A manual call point, also known as an MCP, is a call point or fire point in the fire and safety industry. They are used to enable building residents to signify that there is a fire or other emergency inside the building. They are normally linked to the central fire alarm screen and also to the local fire brigade dispatcher.
Human Intervention Required
Unlike automatic detection systems that use heat detectors and smoke detectors, manual call points require human intervention. They are used alongside automatic alarm systems to provide comprehensive fire detection coverage.
Types of Manual Call Points
Pull Station
Activated by pulling a lever. Available in single-action or dual-action mechanisms.
- Single action: Direct pull
- Dual action: Lift up then pull down
- Requires special key to reset
Break Glass Unit
Plastic enclosure with a plate that drops when pushed, completing the alarm circuit.
- Push to activate
- Zone/location identification
- Key tool restoration
With Protective Cover
Manual call point with plastic cover creating a two-step activation process.
- Prevents accidental activation
- Reduces false alarms
- Clear cover visibility
Hazardous Area Explosion Proof Manual Call Points
Specially designed for explosion-prone areas such as oil refineries, nuclear plants, or chemical factories where the device needs to be sturdy and waterproof to retain its function in case of emergency.
Construction Features
- GRP or aluminum enclosure
- IP66 or IP67 rated sealing
- Outdoor installation capable
Safety Features
- Intrinsically safe design
- No ignition heat generation
- Dusty area compatible
Color Coding Guidelines
Manual call points are color-coded based on their function:
Red
Fire System
Orange
Smoke & Vent Control
Green
Emergency Exit / Access Control
Yellow
Suppression System / Evacuation
How to Use Manual Call Points
Manual call points are used to initiate an alarm signal and operate by means of a simple button press or when glass is broken revealing a button.
When to Activate
A manual call point should be activated in the event of a fire incident by pressing the frangible element to activate the alarm system. Only activate when you have verified a fire or emergency condition exists.
Installation Requirements
- Height: 1.4m above floor level
- Location: Easily accessible and conspicuous positions
- Visibility: Clear red color for fire systems
- Spacing: At intervals allowing quick access
Strategic Placement Guidelines
Proper placement of manual call points is crucial for effective emergency response:
Recommended Locations
- Exit routes and escape doors
- Stairway landings
- Main corridors
- Near fire fighting equipment
- High-risk areas
Installation Standards
- Maximum 30m travel distance
- Clear visibility and access
- Illuminated or signed locations
- Protected from damage
- Regular testing access
Our Manual Call Point Services
Supply
Wide range of manual call points from leading manufacturers for all applications
Installation
Professional installation following fire safety codes and optimal placement guidelines
Maintenance
Regular testing and maintenance to ensure reliable operation during emergencies
Frequently Asked Questions
What are Manual Call Points?
Manual call points are used to trigger a warning signal and work by pushing a simple button or revealing a button when glass is broken. They can form part of an automated alarm system or a manual alarm system.
How to use a manual call point?
Manual call points are used to initiate an alarm signal and operate by means of a simple button press or when glass is broken revealing a button.
When should a manual call point be activated?
A manual call point is a device that enables personnel to raise an alarm in the event of a fire incident by pressing a frangible element. It should be activated only when fire or emergency conditions are verified.
Where should manual call points be located?
Fire alarm call points should be installed at a height of 1.4m above floor level at easily accessible and conspicuous positions, clearly visible (red color), where the person detecting the fire does not have to run too far to activate it.
Ensure Quick Emergency Response with Manual Call Points
For the safety of your facility, equipment and people within it, if you need manual call points and related services, ICEL Bangladesh is the leading supplier throughout Bangladesh. Contact us today!